snmpcollector GUI response is very slow

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

snmpcollector probe GUI response on every operation is very slow.

When GUI start "Loading" to reflect any changes, it takes for a few minutes to finish.

Environment

UIM Server - 8.4 / 8.4.7 / 8.5 / 8.5.1snmpcollector probe 3.31 on a secondary HUB.

Cause

Undetermined. We are investigating the cause of the problem.

Resolution

Please deploy distsrv probe on the secondary HUB where snmpcollector probe is running.

You will get faster GUI response with the workaround.

Additional Information

We have identified the same problem for icmp probe as well. The workaround is also the same.