Determining the version of RSVP

Products

• ASM2- STORAGE MANAGEMENT
• ASM2 Backup and Restore
• RSVP

Issue/Introduction

RSVP is running on the mainframe, Is there any process to know the product's version?

Environment

Component: RSVP

Resolution

The RSVP product used to be purely a standalone product. Some customers still have it installed that way. RSVP is now included as an accessory to the ASM2 product. Some customers have RSVP installed using a part of the ASM2 code. Both installations are under SMP/E.

If you have FMID CNS1000 you have a pure RSVP installation, at version 1.0. You will also have CNU4100 or CNU4200, depending on whether you got the code off of the ASM2 4.1 or 4.2 tape. The code line for these two FMIDs is the same.

If you have CL141B0 or CL142B0, plus CNU4100 or CNU4200, then you installed RSVP as a part of an ASM2 installation of version 4.1 or 4.2 respectively. Again, you have the equivalent of RSVP 1.0.

If you do not have any of the above, then you are running an unsupported version of RSVP.