How to define a new filter for a new Spectrum Alarm Notification Manager (SANM) policy

Products

• Spectrum
• Network Observability

Issue/Introduction

How to define a new filter for a new Spectrum Alarm Notification Manager (SANM) policy

Environment

Release: All Supported Releases
Component: SPCAPP - Applications

Resolution

You can define new filters. A filter must be associated with a policy.

To define a new filter for a new policy

1.Open OneClick Console and select the Locater tab in the Navigation panel.

2.Select All Applications under SANM and click . The available applications and the policy they are using appear in the Contents and Component Detail panels on the right.

3.In the Component Detail panel, click the create/set policy link in the General Information subview. The Select Policy dialog displays.

4.Click Create. The Create SANM Policy dialog displays.

5.Click the Add button.The Add Filter dialog displays.

6.Enter the following information:

Name - Defines the new filter name.
Notes (Optional) - Describes the filter.
Age Time (Optional) - Indicates the time for which the filter holds the alarm. The alarm passes to the alarm processing application after the age time.
Notification Data (Optional) - Defines the data that is sent with the alarm notification.

Additional Information

Please reference the "Create an Alarm Notification Policy" section of the documentation for more information.