CPM top line command gets "NO CPM SERVERS"

Products

• Jobtrac

Issue/Introduction

When  accessing CPM through the JOBTRAC  main panel,  message "NO CPM SERVERS" appears in the upper right corner.  When PF1 is pressed the following appears "011C: No CPM Servers could be located".  What can be done to address this?

Environment

Release:
Component: JOBTRC

Resolution

This is resolved by defining the CPM application name in the CPMOPTS member that resides in the CPM maclib. The following definition will need to be added:

(nnnnnn=cciapplename)        'set CCIApplname=nnnnnn'