Unable to generate the BOXI Jitter report for "Show Top / Worse N" value greater than 50

Article Id: 5818
Status: Published
Updated On: 14-02-2018 07:09
Legacy Id: TEC1936746
Products:
CA Spectrum - OneClick , CA Spectrum - Reporting , CA Spectrum - Integrations , CA Spectrum - Alarms & Event Management
Issue/Introduction:

While trying to generate the BOXI Jitter report for "Show Top / Worse N" value greater than 50 as below:

<Please see attached file for image>

issue_3.png

The error observed is as below:

<Please see attached file for image>

Error_2.jpg

Cause:

This is functioning as designed as running the test for larger number will lead to Performance Issues

Environment:

Spectrum 10.x integrated with CABI BOXI 4.1 SP3 running on all supported platforms

Resolution:

For Jitter/ICMP reports, the maximum supported value for "Show Top / Worse N" is 50. This is restricted to 50 as running it for larger number will lead to Performance Issues

Additional Information:

N/A

insert_drive_file 1558707918305000005818_sktwi1f5rjvs16qvg.jpeg
arrow_downward Download
insert_drive_file 1558707916128000005818_sktwi1f5rjvs16qvf.png
arrow_downward Download