The SNMP agent xxx is responding but does not support the RTTMON MIB

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

The SNMP agent xxx is responding but does not support the RTTMON MIB

 

Environment

DX UIM 20.4.x / 23.4.x

saa_monitor probe any version

Resolution

For saa_monitor probe prerequisite is that the target SNMP agent must support the CISCO-RTTMON-MIB.?
Some network devices may have partial support for this MIB??so saa_monitor probe will not function correctly.

Attached to this article is list of the OID's from the CISCO-RTTMON-MIB which is used by the saa_monitor probe which you can refer in order to confirm if the end device supports this.