Which ports are to be checked for CA products in a DMZ/Firewall environment.

Products

• CA Process Automation Base

Issue/Introduction

Which ports are to be checked for CA Process Automation in a DMZ/Firewall environment.

Environment

Release: ITPASA99000-4.3-Process Automation
Component:

Resolution

From the info found on DMZ configuration, you will need ports 7001, 7003, and the HTTP ports open.
The HTTP ports will be used by the agent to get updates (code, config, etc) from the Orchestrator

Http ports are:

8080 and 80 if you're not using ssl
8443 and 443 if you are using ssl

Check to make sure these ports are open for traffic in both directions.

Additional Information

You can also check: https://techdocs.broadcom.com/us/en/ca-enterprise-software/intelligent-automation/automic-process-automation/04-3-05/installing/prerequisites/port-planning-prerequisites/ports-used-by-ca-process-automation.html