ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

Getting TVF101 message and the interface to TCPIP does not initialize.

book

Article ID: 52594

calendar_today

Updated On:

Products

CMDB for z/OS NetSpy Network Performance NetMaster Network Automation SOLVE NetMaster Network Management for SNA NetMaster Network Management for TCP/IP NetMaster File Transfer Management SOLVE:Operations Automation SOLVE:Access Session Management SOLVE:FTS SOLVE

Issue/Introduction

Description

Getting a TVF101 message with an HPNS error.

Solution

  TVF101 IBM HPNS INTERFACE INITIALISATION FAILURE 4 - UNABLE TO OBTAIN NODE ID 
  N3B220 TCPIP START (TYPE=IBM) FAILED, 7 - IBM MODULE NM520 INITIALISATION FAIL 

VMCF was not started on the LPAR. It can be started by issuing the following: S EZAZSSI

The IBM z/OS Communications Server IP Configuration Guide describes how VMCF can be configured.

Check the index for EZASSI as the location in the manual changes with the release.

Environment

Release: ESBNSP99000-11.6-NetSpy-Premier Support
Component: