ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

Start up of CA 11 Restart and Tracking receives DB00501E - OPEN ERROR - RETURN CODE 68 (012) CXX.

book

Article ID: 52403

calendar_today

Updated On:

Products

CA-11 Datacom DATACOM - AD CIS COMMON SERVICES FOR Z/OS 90S SERVICES DATABASE MANAGEMENT SOLUTIONS FOR DB2 FOR Z/OS COMMON PRODUCT SERVICES COMPONENT Common Services CA ECOMETER SERVER COMPONENT FOC EASYTRIEVE REPORT GENERATOR FOR COMMON SERVICES INFOCAI MAINTENANCE IPC UNICENTER JCLCHECK COMMON COMPONENT Mainframe VM Product Manager CHORUS SOFTWARE MANAGER CA ON DEMAND PORTAL CA Service Desk Manager - Unified Self Service PAM CLIENT FOR LINUX ON MAINFRAME MAINFRAME CONNECTOR FOR LINUX ON MAINFRAME GRAPHICAL MANAGEMENT INTERFACE WEB ADMINISTRATOR FOR TOP SECRET Xpertware Scheduler Job Management

Issue/Introduction

Description:

Start up of CA 11 receives DB00501E - OPEN ERROR - RETURN CODE 68 (012) CXX.

Solution:

CA Datacom/AD MUF should be completely up before starting the CA 11 address space. If not, the following error messages will occur:

U11D-0230-F PLEASE START THE CA-DATACOM MUF
DB00501E - OPEN ERROR - RETURN CODE 68 (012) CXX=

If you find that CA Datacom/AD MUF has successfully initialized, the following steps are necessary to determine why the return code is occurring:

  • Verify that CA 11 is starting on the same LPAR as CA Datacom/AD.

  • If CA 11 is starting on an LPAR (within the sysplex) other than the one CA Datacom/AD MUF is active on, the CA Datacom/AD SVC should be initialized by CAIRIM on that LPAR. Within a sysplex, CA 11 on remote LPARs connects to the CA Datacom/AD MUF via XCF. For XCF setup verifies that the XCFFROM MUF Startup option is uncommented in the DBDATIN1 member in CUSMAC library. The XCFFROM option should specify '*' for the first parameter (wild carded task names that can access the MUF) and also specify the correct TOGROUP value. For additional information see the CA Datacom/DB Database and Systems Administrator Guide Section 2.7.

  • If CA 11 is starting on an LPAR (outside sysplex) other than the one CA Datacom /AD MUF is active on, the CCI Setup for CA Datacom/AD needs to be in place. For additional information see the CA Datacom/DB Database and Systems Administrator Guide Section 2.8.

  • Verify that the MUF startup option has the same value as the MUFNAME or TARGET_MUF_LIST value in the DBIDSPR member in the CA Datacom/AD CUSMAC library. For additional information see the CA Datacom/DB Database and Systems Administrator Guide Section 3.8 (Modifying DBSIDPR Parameters).

Environment

Release:
Component: 11