ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Pre-created Cisco RTTMON/IPSLA tests are not discovered (Legacy KB ID CNC TS34914)
Article ID: 52072
Updated On:
Products
CA eHealth
Issue/Introduction
eHealth will only discover the pre-created test elements when they match both of the following conditions:
Related Issues/Questions:
Pre-created Cisco RTTMON/IPSLA tests are not discovered
RTTMON/IPSLA tests have been created via the command-line on the Cisco router but cannot be discovered
Response tests created by the eHealth Path/PVC manager are not discovered
Problem Environment:
eHealth
(Legacy KB ID CNC TS34914 )
1. The rttMonCtrlAdminOwner (1.3.6.1.4.1.9.9.42.1.2.1.1.2) value doesn't contain the words "Network health . This indicates that the test is set up and managed by eHealth thought the Path/PVC manager.
2. The rttMonCtrlAdminStatus (1.3.6.1.4.1.9.9.42.1.2.1.1.9) is up (value: 1)
Related Issues/Questions:
Pre-created Cisco RTTMON/IPSLA tests are not discovered
RTTMON/IPSLA tests have been created via the command-line on the Cisco router but cannot be discovered
Response tests created by the eHealth Path/PVC manager are not discovered
Problem Environment:
eHealth
(Legacy KB ID CNC TS34914 )
Environment
Release: LHBASC99000-6.2-eHealth-Live Health Upgrade Elements
Component:
Component:
Feedback
Yes
No
Powered by
