How to convert SNMPv2c traps to SNMPv1 traps (Legacy KB ID CNC TS34375 )
Article ID: 51958
Updated On:
Products
CA eHealth
Issue/Introduction
Enable Translation of SNMPv2c Traps to SNMPv1 Traps
You can globally enable translation of SNMP v2c traps to SNMPv1 traps by setting the translate_v2c_traps option.
To enable translation of SNMPv2c traps to SNMPv1 traps
Uncomment the following line: translate_v2c_traps
If the device sends v2c traps without the snmpTrapAddress, enable the following option:
v2c_agentaddr_is_srcaddr
This option makes the v2c trap agent address the same as the source address, in those cases where section 3.2 of RFC3584 states that the agent address will be 0.0.0.0 when the v2c to v1 conversion occurs.
Related Issues/Questions:
How to convert SNMPv2c traps to SNMPv1 traps
Problem Environment:
TrapEXPLODER
(Legacy KB ID CNC TS34375 )
You can globally enable translation of SNMP v2c traps to SNMPv1 traps by setting the translate_v2c_traps option.
To enable translation of SNMPv2c traps to SNMPv1 traps
Uncomment the following line: translate_v2c_traps
If the device sends v2c traps without the snmpTrapAddress, enable the following option:
v2c_agentaddr_is_srcaddr
This option makes the v2c trap agent address the same as the source address, in those cases where section 3.2 of RFC3584 states that the agent address will be 0.0.0.0 when the v2c to v1 conversion occurs.
Related Issues/Questions:
How to convert SNMPv2c traps to SNMPv1 traps
Problem Environment:
TrapEXPLODER
(Legacy KB ID CNC TS34375 )
Environment
Release:
Component: SEAGNT
Component: SEAGNT
Feedback
Yes
No
Powered by
