Adding a filter on the Generate Test Cases tab produces no paths

Article Id: 5161
Status: Published
Updated On: 14-02-2018 07:11
Legacy Id: TEC1841242
Products:
CA Agile Requirements Designer
Issue/Introduction:

Adding a filter when generating test cases results in no paths being generated.

Cause:

  • By default the filters are exclusive. 
  • This means that ARD will only generate paths that can be constructed from the processes and decisions identified by the selected filter. 
  • If you have a filter that selects only specific processes or decisions and you wish to create all paths that touch these then you need to change the setting to Inclusive filtering 

Environment:

Release: TCDWRK99000-2.2-Agile Requirements Designer-Workgroup
Component:

Resolution:

  • when you are on the "Generate Test Cases" tab of the path explorer, click the settings (cog) button under Optimization. Select the radio button for "Inclusive Filtering" 

  • <Please see attached file for image>

    src="/servlet/servlet.FileDownload?file=0150c000004AKODAA4" alt="filter.png" width="829" height="533">

insert_drive_file 1558707222957000005161_sktwi1f5rjvs16qlo.png
arrow_downward Download