After implementing the LE exit, U4039 abend is generated when executing the Demo program
Article ID: 51454
Updated On:
Products
Issue/Introduction
Chapter six of the installation guide for SymDump Batch and Optimizer/II 8.5 outline the language environment (LE) installation considerations. After the LE configuration for either product has been completed you execute the DEMO program shipped to verify the installation. When executing the DEMO program which produces an abend by design neither product captures the abend and LE generates a user U4039 abend.
Environment
Component:
Resolution
After the LE configuration for either product has been completed and the DEMO program shipped to verify the installation is executed, a U4039 abend is generated (Below) and no dump is captured by SymDump Batch and Optimizer/II.
IEA995I SYMPTOM DUMP OUTPUT 676
USER COMPLETION CODE=4039 REASON CODE=00000000
TIME=12.59.49 SEQ=00539 CPU=0000 ASID=003A
PSW AT TIME OF ERROR 078D1000 868D79FE ILC 2 INTC 0D
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW 068D79F8 - 00181610 0A0D58D0 D00498EC
AR/GR 0: 8EB7AEDE/84000000 1: 00000000/84000FC7
2: 00000000/0008BA78 3: 00000000/00060007
4: 00000000/068CC0D8 5: 00000000/0008B5DC
6: 00000000/00000000 7: 00000000/0F35E2A8
8: 00000000/0008BA78 9: 00000000/0008D156
A: 00000000/0008B5DC B: 00000000/068D7928
C: 00000000/00077B58 D: 00000000/0008E278
E: 00000000/868CB1BC F: 00000002/00000000
END OF SYMPTOM DUMP
This is a known problem caused by LE option TERMTHDACT(UADUMP).
The SymDump Batch and Optimizer/II installation guide states that no dump will be captured if your LE configuration uses TERMTHDACT(UADUMP).
Note: The LE option TERMTHDACT(UADUMP) generates a U4039 abend when an unhandled condition occurs of severity 2 or greater.
SymDump Batch or Optimizer/II will not report on this abend.
As a test you may want to set TERMTHDACT(TRACE,,96).
Feedback
