What do Status Flags mean in TPXOPER when displaying user details?
Article ID: 51346
Updated On:
Products
Teleview
TELEVIEW- PACKAGE
TPX - Session Management
Vman Session Management for z/OS
Issue/Introduction
Description:
In TPXOPER, D U then select a specific user and press enter:
Session Applid Status VTermid --Status Flags--- Appl.Logmode TSO12 TSO12 <== ACTIVE *INTRNAL 00008800 40000085 T3278M2E
Environment
Release:
Component: TLVIEW
Component: TLVIEW
Resolution
Solution:
When you are in the TPXOPER display that shows you the Status Flags, press F1. At the bottom of that panel you see: Press ENTER for information on Status Flags, or PF3 to return
Press enter and the flag values are displayed. You can scroll thru all of them as indicated on the panel by pressing enter.
For example:
In TPXOPER, D U:
TPXZA - CA11 ************* TPX Operator ********************** TEN0207
User Summary
---- Status ----- Total Max User
Active Inactive Users Limit
00001 00000 00001 00000
Userid Terminal Status Act User Name
XXXXXXX XXXXXXXX ACT/SESS 001 N.E. User
******************************** BOTTOM OF DATA ******************************* Command ==>
******* PF1=Help PF3=End PF4=Return PF6=Repeat PF7=Up PF8=Down ********
Select User and press ENTER:
TPXZA - CA11 ************* TPX Operator ********************** TEN0207
User Summary
---- Status ----- Total Max User
Active Inactive Users Limit
00001 00000 00001 00000
Userid Terminal Status Act User Name
s XXXXXXX XXXXXXXX ACT/SESS 001 N.E. User
******************************** BOTTOM OF DATA *******************************
TPXZA - CA11 ************* TPX Operator ********************** TEN0209
User Detail Display
USER002
User Name: N.E. User
Termid: XXXXXXXX Terminal Status: ACT/SESS 00000000 C0008000
Model: 3278-4A Active Sessions: 001 Affin. to:
Logmode: T3278M4E Max Sessions: 000 Printer:
Session Applid Status VTermid --Status Flags--- Appl.Logmode
TPXADMIN TPXADMIN INACTIVE
TPXOPER TPXOPER <== ACTIVE *INTRNAL 00000000 800010C0 T3278M4E
TPXMAIL TPXMAIL INACTIVE
TPXVIEW TPXVIEW INACTIVE
TPXNOTES TPXNOTES INACTIVE
TPXWINDW TPXWINDW INACTIVE
TPXDEMO TPXDEMO INACTIVE
TSO A11ITSO INACTIVE
TSO2 A31ITSO INACTIVE
CA31 A31ITSO INACTIVE
FUBAR FUBAR INACTIVE
******************************** BOTTOM OF DATA *******************************
Command ==>
* PF1=Help PF3=End PF4=Rtrn PF6=Rpt PF7=Up PF8=Dwn PF10=Prv PF11=Nxt *
Press F1:
HELP *********************** TPX Operator ********************* HEN0207
TPX Operator commands:
D U(=userid(,MUT=termid)|,{ALL|ACT|INACT|SUMM}) displays information
for TPX userids and their associated terminals and application sessions.
You can display the sessions of one user (D U=userid) or for all users.
If the userid is logged on multiple terminals, you must specify the terminal
with the MUT=termid operand. The display of all users can be limited to a
SUMMary or you can display only ACTive, INACTive, or N-Vision for Windows
users. For detailed information on a user, tab to the user ID, type "S" nex
to it and press ENTER.
C U=userid,(MUT=termid,){ALL|S=sessid}(,F) inactivates a designated session o
ALL sessions for the specified userid. If "F" is also specified, the
termination ACL/E program defined for the session will be bypassed.
UNLOCK userid(,MUT=termid) will unlock a locked terminal and display the
TPX Logo panel.
Press ENTER for information on Status Flags, or PF3 to return ===>
******************************************************************************
Press ENTER:
HELP *********************** TPX Operator ********************* HEN0204A
Terminal Status Flags: Application Status Flags:
Byte 0 Byte 0
X'80' SDT sent - awaiting response X'80' Reserved
X'40' BID sent - awaiting response X'40' Reserved
X'20' CLR sent - awaiting response X'20' Reserved
X'10' CHASE sent - awaiting response X'10' Reserved
X'08' CANCEL sent - awaiting response X'08' Reserved
X'04' DR1 sent - awaiting response X'04' DR1 sent - awaiting response
X'02' OPNDST/CLSDST pending X'02' Reserved
X'01' SHUTC rec'd - Cleanup pending X'01' Reserved
Byte 1 Byte 1
X'80' Request for Shutdown made X'80' Reserved
X'40' Waiting for LUSTAT Inbound X'40' Reserved
X'20' Waiting for Input X'20' Reserved
X'10' Activate but don't switch X'10' Reserved
X'08' HDX Contention mode X'08' HDX Contention mode
X'04' RDBUF issued X'04' Reserved
X'02' Reserved X'02' Reserved
X'01' Terminal is in Signon mode X'01' Reserved
Press ENTER for more information on Status Flags, or PF3 to return ===>
Continue to press ENTER to display the details for each Byte.
Feedback
Yes
No
Powered by
