Clarity: Cost Plan Display TSV, no decimals shows incorrect rounding for 0.50 (rounds down), whereas it shows correct rounding for 1.50 (rounds up)

Products

• Clarity PPM SaaS
• Clarity PPM On Premise

Issue/Introduction

Description:

When the Cost Plan TSV displays a saved value of 0.50; it is showing as zero (rounded down). No decimals configured for the layout. However, for 1.50 saved cost amount, the TSV displays 2 (rounded up); which is correct. It is not consistent. Testing also with 9.50, 10.50, 11.50, 99.50, 100.50, 101.50, etc.

Steps to Reproduce:

1. Login to Clarity
   
   
2. Home > Projects > Financial Plans > Cost Plans
   
   
3. Create a Manual Plan that spans several months
   
   
4. Configure the TSV to show 2 decimal places
   
   
5. For Planned Cost amounts, enter values for testing
   
   Month 1 = 0.50
   Month 2 = 1.50
   Month 3 = 9.50
   Month 4 = 10.50
   Month 5 = 11.50
   Month 6 = 99.50
   Month 7 = 100.50
   Month 8 = 101.50
   
   
6. Click 'Save' button > values are shown with 2 decimal places (confirmed the values are saved as entered and the display is correct)
   
   

   <Please see attached file for image>

   
   
   
7. Change the TSV configuration to show zero (0) decimal places (the display shows rounded values incorrectly as noted)
   
   

   <Please see attached file for image>

   

Expected Result: Amounts for 0.50, 10.50, 100.50 should display rounded up values 1, 11, 101
Actual Result: Amounts for 0.50, 10.50, 100.50 are displayed rounded down values 0, 10, 100 - all other rounding display is correct

Solution:

Workaround:
Configure the TSV field to show 2 decimal places always

Status/Resolution:
There are no plans to make changes in this area of the product at this time. Continue to use the identified workaround.

Keywords: CLARITYKB, CLRT-68454, clarity13open, time varying attribute, time-scaled value, configuration.

Environment

Release: ESPCLA99000-13.2-Clarity-Extended Support Plus
Component:

Resolution

.