Clarity: Classic Cost Plan Display TSV and totals, decimals rounding down for 0.05 rounds down), whereas all other decimals round correctly.

Products

• Clarity PPM SaaS
• Clarity PPM On Premise

Issue/Introduction

In Classic, when the Cost Plan, both TSV and totals, displays a saved value of 0.50 or any value with the last digit showing 5 (0.5, 0.005... etc) ; it is showing as zero (rounded down). 

Steps to Reproduce:

This can be reproduced based on any number of decimal places.

1. Login to Clarity
   
   
2. Home > Projects > Financial Plans > Cost Plans
   
   
3. Create a Manual Plan that spans several months
   
   
4. Configure the TSV to show 2 decimal places
   
   
5. For Planned Cost amounts, enter values for testing
   
   Month 1 = 0.50
   Month 2 = 1.50
   Month 3 = 9.50
   Month 4 = 10.50
   Month 5 = 11.50
   Month 6 = 99.50
   Month 7 = 100.50
   Month 8 = 101.50
   
   
6. Click 'Save' button > values are shown with 2 decimal places (confirmed the values are saved as entered and the display is correct)
   
   
   
7. Change the TSV configuration to show zero (0) decimal places (the display shows rounded values incorrectly as noted)
   
   

Expected Result: Amounts for 0.50, 10.50, 100.50 should display rounded up values 1, 11, 101
Actual Result: Amounts for 0.50, 10.50, 100.50 are displayed rounded down values 0, 10, 100 - all other rounding display is correct

 

Resolution

Workaround:
Configure the TSV field to show maximum decimal places always.

Status/Resolution:
There are no plans to make changes in this area of the product at this time. 

MUX does show the correct rounding.