How to skip the TCU0025 panel display

Products

• Teleview
• TELEVIEW- PACKAGE
• TPX - Session Management
• Vman Session Management for z/OS

Issue/Introduction

 

How do I stop the TCU0025 panel from displaying?

The security product is Top Secret (TSS) 15.0.

When invoking the TPX applid, the TCU0025 screen always displays between TCU0003 and TCU0041 as follows:

  TCU0025 TPX Signon Information 

  ------------------------------------------------------------------------- 

  TSS7000I JSYSDJC Last-Used 22 Jul 11 02:24 System=CDCP Facility=BATCH 

  TSS7001I Count=21464 Mode=Fail Locktime=None Name=USER, N. E. 

  Press Enter to continue 

  Command ===> 

  F3=Exit 

Why is the TCU0025 panel displayed?

 

 

Environment

Release:
Component: TPX

Resolution

The Txx0025 panel is used to display signon messages that are returned from your security system.

The Security Action/Message Tables (SAMTs) is used to specify how TPX will respond to return codes and messages from your security system. A SAMT consists of entries for return codes and messages. For each entry there is a corresponding action for the software to take or a reference to a message for the software to display, or both.

This is how the SAMT can be modified to suppress specific Message IDS:

Go to TPXADMIN:

1. Select system options - OPT 2.
   
   
2. Select Security Action/Message Processing - OPT 8.
   
   
3. Select the security system you are using ( e.g. TOPS).
   
   
4. Add "Y" to suppress the desired message ids in the SAMT (e.g. for #0070001 and #0070000).
   
   
5. Recycle TPX for the changes to take place.

(This will apply for any of the language panels such as TCU0025, TEN0025, or any Txx0025, where xx is the language.)

See the TPX Administration Guide for details on specifying Security System Actions and Messages.