Update of Endevor Processor failing with S013

Products

• Endevor

Issue/Introduction

When trying to update an Endevor Processor, it fails with a S013 in the GPPROCSS INITLIST step:

C1G0246I PROCESSOR GPPROCSS LOADED FROM CONLIB 

C1X0012I STEP INITLIST INVOKING PROGRAM BC1PDSIN 

C1X0011S STEP INITLIST PROGRAM BC1PDSIN ABENDED, CODE=S013 

C1G0129E STEP INITLIST RC (S013) EXCEEDS THE MAX RC (0000) FOR THE PROCESSOR STEP

 

Resolution

Change the C1DEFLTS parm PRBLKSZ to 0 or specify the value for this parameter that is a multiple of 121.

PRBLKSZ=0 - Indicates the blocksize to be used for temporary files when compiling processors. If you are on a version of z/OS that does not support BLKSIZE=0, you must specify the value for this parameter that is a multiple of 121.

Additional Information

PRBLKSZ=0

Indicates the blocksize to be used for temporary files when compiling processors. If you are on a version of z/OS that does not support BLKSIZE=0, you must specify the value for this parameter that is a multiple of 121.