On a possible external cause for error IPSD0003 to occur on the NetMaster region.

Products

• NetMaster Network Automation
• NetMaster Network Management for SNA
• NetMaster Network Management for TCP/IP
• NetMaster File Transfer Management
• SOLVE
• SOLVE:FTS

Issue/Introduction

Error IPSD0003 can also occur on the NetMaster region when a packet trace is run outside of NetMaster and then      it is
stopped. This would cause the NetMaster packet trace intercept to also stop--if the command to stop it    was not specific.
 

 

 

Environment

OS: z/OS.

Cause

 

Resolution

We list the command to restart the packet trace intercept for the NetMaster region. The following command    should be
executed on NetMaster CMD option to restart the packet trace intercept for the region:

SYSCMD VARY TCPIP,TCPIP,PKTTRACE,ON,LINKNAME=*,PROT=254

Note: The VARY command assumes that the TCP/IP proc name is TCPIP. Please see z/OS manual IP System Admin-
istrator's Commands for command details.
 

Additional Information

If this does not match your problem, please review these additional documents for a possible solution: 

https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=98157

https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=72638

https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=45396