Spectrum MIB Tools missing traps after compiling the CWRS-4150A-MIB mib

Products

• CA Spectrum

Issue/Introduction

The CWRS-4150A-MIB has 58 traps defined. After compiling the mib in Spectrum MIB Tools, only 52 traps were seen in MIB Tools.

Environment

Release: Any
Component:

Cause

Upon reviewing the CWRS-4150A-MIB, the reason the 6 traps were not mapped is because the trap names started with capital letters. The following is an example:

LVD1Alarm TRAP-TYPE
	ENTERPRISE cwrs-4150
	DESCRIPTION
		"WARNING "
   --#TYPE "LVD1 open alarm "
   --#SUMMARY "LVD1 Open"
   --#ARGUMENTS { }
   --#SEVERITY MAJOR
   --#TIMEINDEX 1
   --#HELP ""
   --#HELPTAG 0
   --#STATE OPERATIONAL
	::= 6

According to the standard, trap names must start with a lower case letter.

The 6 traps are as follows:

LVD1Alarm

LVD2Alarm

LVD1Recovered

LVD2Recovered

BatteryDischargeRecovered

BatteryTempRecovered

Resolution

Manually modify the trap names in the CWRS-4150A-MIB mib correcting the errors and recompile in MIB Tools.