Manual interim workaround for CVE-2026-111497 (Brotli) on SDDC Manager 5.2.x, 9.0.2, 9.1.0
search cancel

Manual interim workaround for CVE-2026-111497 (Brotli) on SDDC Manager 5.2.x, 9.0.2, 9.1.0

book

Article ID: 460734

calendar_today

Updated On:

Products

VMware SDDC Manager / VCF Installer VMware Cloud Foundation

Issue/Introduction

CVE-2026-111497 is a Critical severity vulnerability that impacts SDDC manager. This vulnerability and its impact on the mentioned VMware products are documented in the following VMware Security Advisory (VMSA), please review this document before continuing:

VMSA-2026-0008

Environment

  • SDDC Manager 5.2.x
  • SDDC Manager 9.0.2
  • SDDC Manager 9.1.0

Cause

Incompatibility in Brotli compression libraries during the CVE mitigation process leads to service failure.

Resolution

Note: If your SDDC Manager is on 9.1.1.x please follow the steps in KB, "Manual interim workaround for CVE-2026-111497 (Brotli) on SDDC Manager 9.1.1.x"

The workaround described in this document is meant to be a temporary solution only and is intended to ONLY address CVE-2026-111497.

There are two solution paths outline below, Automated and Manual steps, should you face any issues with either workflow please engage VMware by Broadcom Support.


Automated Steps

Prerequisites

  1. Take a backup or snapshot of the SDDC Manager appliance.
  2. Make sure no SDDC Manager task is running, such as an upgrade, a workload domain operation or a certificate replacement.
  3. Download the script CVE-2026-111497_pre911_remediation.sh attached to this KB.
  4. Copy the script to the SDDC Manager host.
  5. If the file was downloaded or edited on Windows, remove Windows line endings:
    sed -i 's/\r$//' CVE-2026-111497_pre911_remediation.sh

Execution

  • The script has three commands. Run them as root, in this order.

Check: Validates the SDDC Manager version and the appliance. It changes nothing.

  1. bash CVE-2026-111497_pre911_remediation.sh check
  • Checks the SDDC Manager version, the health of the SDDC Manager UI, and whether the workaround can be applied (or is already working). Makes no changes.

Apply: Applies the workaround.

  1. bash CVE-2026-111497_pre911_remediation.sh apply
  • The script checks that the SDDC Manager UI is healthy, backs up the current settings, adds the workaround file and updates the SDDC Manager UI service settings. It then restarts the SDDC Manager UI and verifies the result. Note: If any step fails, the script undoes its changes automatically and says so.

Rollback (optional): Removes the workaround. Use it only if you need to undo the change, for example because of an issue after applying it.

  1. bash CVE-2026-111497_pre911_remediation.sh rollback

It removes the workaround file and the service setting, restarts the SDDC Manager UI and confirms the UI no longer uses the workaround.


Manual Steps

Step 1: Pre-requisites

  1. Backup SDDC-M appliance.
  2. SSH to the SDDC Manager as vcf user and then change to root.

Step 2: Create Preload File

Create the preload file and set directory and file permissions:

mkdir -p /etc/cve-111497
chmod 755 /etc/cve-111497
cat > /etc/cve-111497/nobrotli.cjs <<'EOF'
// CVE-2026-111497 interim: removes zlib.createBrotliDecompress, the decoder axios uses for br. 
delete require('zlib').createBrotliDecompress;
EOF

chmod 644 /etc/cve-111497/nobrotli.cjs
chmod 755 /etc/cve-111497

Step 3: Add Environment for the UI service

  1. Change directory to /etc/systemd/system:
    cd /etc/systemd/system
  2. Take backup of file sddc-manager-ui-app.service:
    cp sddc-manager-ui-app.service sddc-manager-ui-app.service.bak
  3. Edit the file sddc-manager-ui-app.service and add the following line: Environment=NODE_OPTIONS=--require=/etc/cve-111497/nobrotli.cjs

Sample result:

Step 4: Restart Service and Verify UI

  1. Restart the service using below commands:
    systemctl daemon-reload
    systemctl restart sddc-manager-ui-app
  2. Execute below script and wait for the UI to answer. A value other than 503 or 000 means the UI is up.
    for i in $(seq 1 40); do
      c=$(curl -s -o /dev/null -w '%{http_code}' -X POST http://127.0.0.1:7500/ui/api/ping \
          -H 'Content-Type: application/json' --data-binary '{"a":1}')
      [ "$c" != 503 ] && [ "$c" != 000 ] && break
      sleep 6
    done;
    echo "ui_code=$c"

Step 5: Verify

  1. Check service and preload: Check that the service is running and the preload is loaded in the main process and in the forked child processes:

    systemctl show -p Environment sddc-manager-ui-app | tr ' ' '\n' | grep NODE_OPTIONS
    1. Result: NODE_OPTIONS=--require=/etc/cve-111497/nobrotli.cjs
    2. Expected: The service is active, and every PID shows NODE_OPTIONS=--require=/etc/cve-111497/nobrotli.cjs.
  2. Check UI Functionality: Check that the UI works by logging in and opening the Inventory and Domains pages.

    1. Expected: Both pages load.
  3. Check Logs: Check the journal for Brotli or decompression errors since the restart using below command:

    journalctl -u sddc-manager-ui-app --since "10 min ago" --no-pager | grep -i -E 'brotli|zlib|decompress' | head -50
  4. Expected: Blank result (no lines).

Step 6: Roll back (Optional)

Used if the UI doesn't work after following above steps.

  1. Restore SDDC-M or restore the file sddc-manager-ui-app.service taken in Step 4.b.
  2. Change directory to /etc/systemd/system:
    cd /etc/systemd/system
  3. Restore the file from the backup:
    cp sddc-manager-ui-app.service.bak sddc-manager-ui-app.service
  4. Remove the directory and preload file:
    rm -rf /etc/cve-111497
  5. Reload and restart the service:
    systemctl daemon-reload
    systemctl restart sddc-manager-ui-app

Additional Information

VMSA-2026-0008: Node.js Brotli decoder out-of-bounds write remote code execution vulnerability (CVE-2026-111497)

 

Logs and backups:
  • The automated script, a log file is generated: /var/log/vmware/vcf/cve-2026-111497-outbound.log. Attach it to any support request.
  • Backup of the original settings: /var/backups/cve-2026-111497-outbound/. The script deletes it after a successful rollback.
  • These steps apply to SDDC Manager 5.2.x, 9.0.x and 9.1.0.x. If your SDDC Manager is on 9.1.1.x, follow KB 460732, "Manual interim workaround for CVE-2026-111497 (Brotli) on SDDC Manager 9.1.1.x", instead. Don't apply this workaround on 9.1.1.x. SDDC Manager 5.1.x and earlier are not affected.
  • Use either the automated script or the manual steps in this KB, not both. Roll back with the same method you used to apply.
  • An upgrade to a release that still has the unfixed Node.js runtime removes the workaround. After such an upgrade, run the script again, starting with check. An upgrade to a release that includes the fix doesn't need the workaround.

Attachments

CVE-2026-111497_pre911_remediation.sh get_app