View Access Log Format Configuration via CLI on Edge SWG

Products

• ISG Proxy

Issue/Introduction

Use this article to view the configured access log format details on your Edge SWG (ProxySG) appliance using the Command Line Interface (CLI).

Resolution

Perform the following steps in the CLI to retrieve the configuration details for a specific access log format:

1. Enter privileged mode: enable
2. Enter configuration mode: config t
3. Access the log configuration: access-log
4. Specify the format you wish to view: edit format [format_name]
5. Display the configuration: view

Additional Information

 

• For assistance with enabling general Syslog monitoring, refer to Enable Syslog on the Edge SWG (ProxySG).
• To speak with a customer representative or a Support Engineer see Contact Support. Scroll to the bottom of the page and click on your respective region.