MODID ERROR FOR MOD ENTRY XPFRUTL1 IN SYSMOD RO88723

Products

• SYSVIEW Performance Management
• NXBRIDGE - SYSVIEW/ENDEVOR

Issue/Introduction

Problem: 

When attempting to apply PTF RO88723 errors similar to the following may occur and apply processing fails:

GIM38201E ** THERE IS A MODID ERROR FOR MOD ENTRY XPFRUTL1 IN SYSMOD RO88723.
GIM31901I SYSMOD RO88723 DOES NOT SPECIFY RO76504 ON THE PRE OR SUP OPERAND. RO76504 IS THE RMID FOR MOD XPFRUTL1 
THAT IS CURRENTLY INSTALLED.

 

  GIM38201E ** THERE IS A MODID ERROR FOR MOD ENTRY XPFRUTL1 IN SYSMOD
               RO88723.
  GIM31903I    SYSMOD RO88723 DOES NOT SPECIFY RO76504 ON THE PRE OR SUP
               OPERAND. RO76504 IS THE RMID FOR MOD XPFRUTL1
               THAT IS BEING INSTALLED.
  GIM22601I    APPLY PROCESSING FAILED FOR SYSMOD RO88723.
  GIM30202E ** APPLY PROCESSING FAILED FOR SYSMOD RO85946. ALL SYSMODS
               THAT WOULD HAVE SUPERSEDED RO85946 HAVE FAILED.
  GIM35942I    SYSMOD RO88723, WHICH WOULD HAVE SUPERSEDED SYSMOD RO85946,
               FAILED.
  GIM20501I    APPLY PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 08.

 

Cause:

SMP/E errors are possible when attempting to apply PTF RO88723. An SMP/E packaging problem may not allow RO88723 to be applied if the target library is at a particular service level. Specifically, if PTF RO85946 is not applied, then RO88723 will get an RC=8 apply failure when applying RO85946 and RO88723 at the same time.

 

 

Resolution:

PTF RO90270 resolves the packaging error associated with RO88723. 

 

Workaround:

 Apply RO85946 and its prerequisites separately. Afterwards you should be able to apply RO88723 without issue.

 

Environment

Release:
Component: SYSVW