C1G0129E compile step RC (0020) EXCEEDS THE MAX RC (0004) FOR THE PROCESS
search cancel

C1G0129E compile step RC (0020) EXCEEDS THE MAX RC (0004) FOR THE PROCESS

book

Article ID: 434179

calendar_today

Updated On:

Products

Endevor

Issue/Introduction

When generating an element in Endevor, the generate action fails with the following error sequence in the job output:

IEC130I SYSLIN   DD STATEMENT MISSING
...
C1X0012I  STEP ASMMAP INVOKING PROGRAM ASMA90                           
C1X0013I  PARM=SYSPARM(MAP),'                                           
C1X0010I  STEP ASMMAP PROGRAM ASMA90 COMPLETED, RC=0020                 
C1G0129E  STEP ASMMAP RC (0020) EXCEEDS THE MAX RC (0004) FOR THE PROCESS
...

Environment

Release : 18.1 and 19.0
Component : Endevor Software Change Manager

Cause

The High-Level Assembler (ASMA90) requires specific DD statements based on the assembly options provided in the processor.

  • The OBJECT option triggers a requirement for the SYSLIN DD statement.
  • The DECK option triggers a requirement for the SYSPUNCH DD statement.

If the assembler is configured to produce an object module (OBJECT) but the Endevor processor step lacks a //SYSLIN DD statement, the step fails with RC 20 and the IEC130I message.

Resolution

Troubleshooting Steps

  1. Locate the Assembly Listing:
    • Check the Endevor listing library defined in your processor.
    • If MONITOR=COMPONENTS is active, use the LL (List Listing) line command on the element.
    • If browsing the library directly:
      • RECFM=F/FB: Browse via ISPF.
      • RECFM=V/VB: Use Endevor Menu 1 (Display) > 2 (Footprint) and use the L command to decompress and view.
  2. Verify Assembler Options: Check the start of the assembly report for the active options (OBJECT/NOOBJECT, DECK/NODECK).


Resolution Options

Option A: Adjust Assembler Options (Recommended if using SYSPUNCH)

If your processor is designed to use the SYSPUNCH DD (often used for later binder steps), ensure the assembler is explicitly told not to look for SYSLIN by using NOOBJECT.

  • Update the PARM string in the processor COMPILE step to include: DECK,NOOBJECT.

Option B: Add the Missing DD Statement

If an object module is required, you must add a valid SYSLIN DD statement to the processor COMPILE step.

Example JCL Addition:

//SYSLIN   DD DSN=&&PD0015,UNIT=SYSDA,                         
//         DISP=(NEW,PASS,DELETE),SPACE=(1700,(1000,300),RLSE)