Unable to add NSX-T manager as the data source in VCF Operations for Networks

Products

• VCF Operations for Networks

Issue/Introduction

• Below error received while adding NSX manager as a data source in vRNI:
• 
• To check the connectivity between NSX VIP and collector node, initiate the pings from collector to NSX VIP and its pingable.

Environment

VCF Operations for Networks

Cause

Initiate the Netcat command as stated below from collector node CLI to NSX VIP to test port connectivity on TCP port 443 between collector and NSX VIP:

nc -zv <NSX VIP> 443

The port connectivity on TCP port 443 fails between collector node and NSX VIP.

 

Resolution

Enable TCP port 443 between collector node and NSX VIP to add NSX manager as a data source in vRNI.

Additional Information

Refer below document for the pre-requisites , considerations and procedure to add NSX-T manager as a data source in vRNI:

https://techdocs.broadcom.com/us/en/vmware-cis/aria/aria-operations-for-networks/6-14/vrealize-network-insight-ug-4-1-and-later-6-14/adding-a-data-source-in-vrealize-network-insight/supported-vmware-managers/add-vmware-nsx-t-manager.html