Storage controllers used for vSAN must be fully supported as per the vSAN Compatibility Guide
Article ID: 424920
Updated On:
Products
VMware vSAN
Issue/Introduction
The Skyline health check flags an unsupported driver or firmware for a disk or storage controller in use for vSAN.
A storage device, e.g. a HBA, can be certified for use with ESX for other storage types, but the same combination of driver and firmware may not be certified for use with vSAN.
Environment
vSAN 8.x, 9.x
Cause
There is a separate Compatibility Guide for devices in use for vSAN, with different qualifying requirements than for other storage.
IO Devices:
- Devices may be on both of the above, but can have different drivers or firmware certified for vSAN.
Disks:
Resolution
Ensure that disks and storage controllers used for vSAN are fully supported as per the vSAN Compatibility Guide.
Additional Information
Feedback
Yes
No
Powered by
