CA 7 LRLOG command getting SLIP-85

Products

• CA 7 Workload Automation

Issue/Introduction

Issue:

LRLOG,[email protected]*,SPAN=25 
/LOGOFF * GENERATED LOGOFF * 
BSTR-00 *** END OF INPUT *** 
16131 093903 /LOGON ******** 

CA-7.023 - r11.3( ) OPERATOR IS LOGGED ON TO TERMINAL BTERM1 AT 09:39:03 ON 
16131 093903 LRLOG,[email protected]*,SPAN=25 

SLIP-85 SCRPUT SCR. EC1=55 EC2=00000000 
16131 093909 /LOGOFF 

The error message says to check the DAIO statement in the initialization file. The SCRTRK/SWFTRK parameter may need to be increased.

Client already had SWFTRK=255 (maximum)

Cause:

The DAIO statement had DASD=3380 when actually 3390s were in use. With DASD=3380, the 'whole' track is not being utilized by CA 7 for writing/sorting the output from the command--7 is currently utilizing the 3390 as if it was a 3380 which has less room on each track. 

Resolution:

Change the DAIO statement DASD= to 3390.  A DMPQ/MOVQ process for shutting down and starting CA7ONL is required.

Additional Information:

As always, please contact CA Technologies support for CA 7 if you have further questions.

Environment

Release:
Component: 7