Verifying proper install of ISG-QAT-S410 crypto accelerator card on ISG for SSL Visibility.

Products

• ISG SSLV

Issue/Introduction

To run SSL Visibility as an ISG virtual application, the S410-20B and S410-40B appliances require an ISGQAT-
S410 crypto accelerator card that is installed in slot 4. SSP-S210-10 appliances include an onboard crypto
accelerator.

Environment

SSLV installed on ISG SSP-S410-20B or SSP-S410-40B.

Resolution

The ISG-QAT-S410 card must be installed in slot 4 for proper operation.  For details on installing the option card information can be found here, Install an S410 Option Card.

The SSLV install, as noted, needs to be installed in slot 4 for proper operation.  This slot is the on the Left Riser card, on the lower slot.

To ensure the card is properly installed in the system the following command can be run:

ISG-LAB# crypto-accelerators view

The output from this command should resemble the below:

PCI Address     Device Name                              In Use Application
--------------- ---------------------------------------- ------ ---------------
0000:XX:00.0    C62x Chipset QuickAssist Technology      True   sslv
0000:XX:00.0    C62x Chipset QuickAssist Technology      True   sslv
0000:XX:00.0    C62x Chipset QuickAssist Technology      True   sslv