OPS/MVS IOF Error - OPS3187O IMS SYSTEM IMSx SCD TAG ERROR AT X'00F60300'

Products

• OPS/MVS Event Management & Automation

Issue/Introduction

Error OPS3187O IMS SYSTEM IMSx SCD TAG ERROR AT X'00F60300' is issued upon IMS start up and OPS/MVS IOF connection.

The manual indicates to confirm

1. the OPSAOE00 or OPSAOUE0 exits are installed. The IMS team confirm both exits are installed in the region (IMSx).
2. IMSCMDnOFFSET and IMSAOInOFFSET are set properly. This was confirmed by running options 4.7 to check the existing values configured (they matched)
3. Produce and AMBLIST of DFSVNUC.

Environment

OPS/MVS 14.0

Cause

09:56:40 OPS3187O IMS SYSTEM IMSx SCD TAG ERROR AT X'00F62170'      
09:56:40 OPS3187O IMS SYSTEM IMSx SCD TAG ERROR AT X'00F62170'      
09:56:40 OPS3187O IMS SYSTEM IMSx SCD TAG ERROR AT X'00F62170'  

The OPS2000O is issued a short time later.

09:56:43 OPS2000O IMS SYSTEM IMSx STARTED    

Timings indicate that IMS had not completely started prior to IOF exits being loaded.

Resolution

This message is normal and can be ignored.  No action required.

Once IMS region has started IOF exits work successfully.