VCF 9.0 NSX-T Edge passwords missing from VCF Ops 9.0 UI

Products

• VMware NSX
• VMware Cloud Foundation
• VMware SDDC Manager / VCF Installer
• VCF Operations

Issue/Introduction

• NSX-T edge passwords are not manageable in the VCF Ops UI or SDDC Manager UI.
• NSX-T edges are not present in the SDDC Manager UI. 

Environment

VMware Cloud Foundation 9.0

Cause

To sync NSX-T edge information into VCF Ops the , "Auto generate passwords with VCF to manage Edge nodes" must be enabled during the edge deployment.

Resolution

1. Login to the VCF Operations 9.0 UI.
   
   
2. Select Inventory > The VCF Instance > Actions > Sync Inventory
   
   
3. Check the, "Enable Edge cluster sync and import NSX Edge node VMs"
   
   
   
   
   
4. Once the sync completes the NSX Edges will be present in VCF Ops and SDDC Manager.

NOTE: Perform a Shut Down and Power On of the SDDC Manager Appliance if the steps above do not resolve the issue.