Tier-0 shows as failed on NSX-T Manager

Products

• VMware NSX

Issue/Introduction

• Status of Tier-0 has below errors
  Found errors in the request. Please refer to the related errors for details.
[Routing] Transport node xxxxx-xxx-xxxx-xxx-xxx. of Edge cluster member must belong to transport zone xxxxx-xxx-xxx-xxx-xxx of linked logical switch port xxxxx-xxx-xxxx-xxx-xxx.
• No errors / warnings on Transport Nodes, Tier-1
• Create VRF Uplink on an edge node not having VLAN Transport Zone of the segment and with Access VLAN within range of segment.
  When change the edge node member index of VRF uplink interface, Tier-0 consolidated status remains failed even after realization of new trunk port. VRF uplink interface remains in In-Progress state.

Environment

3.x
4.0
4.1
4.2.0
4.2.1
4.2.2.x
4.2.3
9.0.0
9.0.1

Cause

Old unrealized Trunk port realization entity and its Trunk switch Port not getting cleared on updating edge member index of VRF Interface

Resolution

Reported issue is already fixed on version 4.2.4, 9.0.2 & 9.1

 

Additional Information

Note: If the above mentioned symptoms aren't matching. Please refer KB article 401811

Please contact Broadcom Support, for the workaround steps.