vSAN ESA unable to be configured due to HCL warning about controller
vSAN ESA 8.0+
Per vSAN Design Guide on page 17
vSAN does not support NVMe drives being placed behind RAID controllers or Tri-Mode controllers. Beyond being unsupported, this has been shown to cause performance problems, especially in configurations that limit NVMe drives to a single PCI-Express lane. While some ReadyNodes have used PCI-Express switches or expansion devices, these are commonly not needed on the most modern of CPU architectures today.
Disable the controller via BIOS and ensure ESA supported NVMe drives are connected directly to CPU via PCIe