create different cdm monitoring profiles for different FS with MCS
Article ID: 409588
Updated On:
Products
Issue/Introduction
How do you create different disk monitors with cdm for different profiles and for different file systems (FS) using MCS templates?
You want to create alarms for different thresholds for specific and different FS.
Environment
- DX UIM 23.4.*
- cdm 8.*
Cause
Guidance
Resolution
First check cdm MCS Profile Type Configuration for prerequisites and basic concepts about MCS.
To monitor different File Systems with CDM and create alarms using Alarm Policies with different thresholds fo each different FS
Create Metric Profile with MCS:
1. create a Defaut Disk (Enhanced) profile
2.Once deployed, click on "Default Disk" and create a sub-profile to be able to choose the specific File System.
3. For example - Create a monitor fo the FS: "/dev:"
CREATE ALARMS with Alarm policies
to create ALARMS, once profile DISK is created, you'll have default alarm policies on one hand:
If you want a "FS Specific" alarm you'll have to add a condition:
And then chose the metric/group/device and then the specific filesystem:
Example: /dev:
Additional Information
Feedback
