Pre-check operation during converge fails with Error:"The speed of vmnic0 on host is 1000 MB/s but must be at least 10 GB/s according to minimum hardware requirements.

Products

• VMware SDDC Manager

Issue/Introduction

• Pre-check operation during converge fails with below error

 

Environment

VMware Cloud Foundation 9.0

Cause

This error occurs when the minimum required bandwidth for the physical NIC of the Management network is below 10Gbps

Resolution

To resolve this issue, use a physical NIC with a bandwidth of 10Gbps or higher

Additional Information

Ref: Converging Existing Virtual Infrastructure to a VCF or a vSphere Foundation Platform