ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Deactivate the Federation partnership using XPSExplorer .
Article ID: 40644
Updated On:
Products
CA Single Sign On Secure Proxy Server (SiteMinder)
CA Single Sign On SOA Security Manager (SiteMinder)
CA Single Sign-On
Issue/Introduction
How to deactivate the federation partnership using XPSExplorer?
Environment
SiteMinder 12.5, 12.51, 12.52.
All supported OS
All supported OS
Resolution
For SAML 2.0 Partnerships, go to command prompt and run XPSExplorer.
1. PartnershipBase (It should be 56, but check to confirm)
2. s - Search objects (It lists all Partnership)
3. Identify the partnership that need to be deactivated and enter its corresponding number.
4. Enter W (Get writable copy)
5. Locate Status attribute (It should be 58, but check to confirm) and enter the selection
6. Enter ? to view the options:
Attr: Status [CA.FED::PartnershipBase.Status]
Desc:"Specifies the status of this partnership"
Type: Number {1}
------------------------------- Bits ------------------------------
1 - Defined = 2
2 - Inactive = 4
3 X Active = 3
4 - Incomplete = 1
-------------------------------------------------------------------
(Currently the status is active)
7. To Deactivate - Enter 4.
8. Enter U to update
9. Quit XPSExplorer
For WSFED Partnerships, go to command prompt and run XPSExplorer.
1. WSFEDPartnershipBase (It should be 85, but check to confirm)
2. s - Search objects (It lists all WSFED Partnership)
3. Identify the partnership that need to be deactivated and enter its corresponding number.
4. Enter W (Get writable copy)
5. Locate Status attribute (It should be 58, but check to confirm) and enter the selection
6. Enter ? to view the options:
Attr: Status [CA.FED::WSFEDPartnershipBase.Status]
Desc:"Specifies the status of this partnership"
Type: Number {1}
------------------------------- Bits ------------------------------
1 - Defined = 2
2 - Inactive = 4
3 X Active = 3
4 - Incomplete = 1
-------------------------------------------------------------------
(Currently the status is active)
7. To Deactivate - Enter 4.
8. Enter U to update
9. Quit to Main Menu
10. STSWebService (It should be 153, but check to confirm)
11. s - Search objects (It lists all Secure Token Service objects)
12. Identify the STS that need to be deactivated and enter its corresponding number.
13. Enter W (Get writable copy)
14. Locate IsEnabled attribute
15. Update from "True" to "False"
16. Enter U to update
17. Quit XPSExplorer
1. PartnershipBase (It should be 56, but check to confirm)
2. s - Search objects (It lists all Partnership)
3. Identify the partnership that need to be deactivated and enter its corresponding number.
4. Enter W (Get writable copy)
5. Locate Status attribute (It should be 58, but check to confirm) and enter the selection
6. Enter ? to view the options:
Attr: Status [CA.FED::PartnershipBase.Status]
Desc:"Specifies the status of this partnership"
Type: Number {1}
------------------------------- Bits ------------------------------
1 - Defined = 2
2 - Inactive = 4
3 X Active = 3
4 - Incomplete = 1
-------------------------------------------------------------------
(Currently the status is active)
7. To Deactivate - Enter 4.
8. Enter U to update
9. Quit XPSExplorer
For WSFED Partnerships, go to command prompt and run XPSExplorer.
1. WSFEDPartnershipBase (It should be 85, but check to confirm)
2. s - Search objects (It lists all WSFED Partnership)
3. Identify the partnership that need to be deactivated and enter its corresponding number.
4. Enter W (Get writable copy)
5. Locate Status attribute (It should be 58, but check to confirm) and enter the selection
6. Enter ? to view the options:
Attr: Status [CA.FED::WSFEDPartnershipBase.Status]
Desc:"Specifies the status of this partnership"
Type: Number {1}
------------------------------- Bits ------------------------------
1 - Defined = 2
2 - Inactive = 4
3 X Active = 3
4 - Incomplete = 1
-------------------------------------------------------------------
(Currently the status is active)
7. To Deactivate - Enter 4.
8. Enter U to update
9. Quit to Main Menu
10. STSWebService (It should be 153, but check to confirm)
11. s - Search objects (It lists all Secure Token Service objects)
12. Identify the STS that need to be deactivated and enter its corresponding number.
13. Enter W (Get writable copy)
14. Locate IsEnabled attribute
15. Update from "True" to "False"
16. Enter U to update
17. Quit XPSExplorer
Feedback
Yes
No
Powered by
