TLMS - VTS is not updated correctly

Products

• TLMS Tape Management

Issue/Introduction

Once the volume has been scratched by TLMS - the status in the VTS stay in PRIVATE status.

Resolution

To synchronize correctly TLMS and VTS the following things should be verified:

1) set ROBSCR=YES on the TLMSSTAT

2) Running a CATINQR with DVD vvvvv  and check the ATL field . This one should be set to ATL=VIBM    /001

 

When the ROBSCR parameter from TLMSIPO was changed to YES, TLMS should be reinitialized via CAS9 and CTS recycled.