AppNeta c50 (Docker) - Talos Container Boot Loop

Products

AppNeta

Issue/Introduction

When Recreating/Installing AppNeta c50, Talos container is continuously rebooting.

sudo docker ps

NAME IMAGE COMMAND SERVICE CREATED STATUS PORTS
container-sequencer-1 appneta.azurecr.io/pathview-cmp:release "/sbin/entrypoint.sh" sequencer 11 minutes ago Up 3 minutes (healthy) 0.0.0.0:7->7/udp, :::7->7/udp, 0.0.0.0:443->443/tcp, 0.0.0.0:1720->1720/udp, :::443->443/tcp, :::1720->1720/udp, 0.0.0.0:3236->3236/tcp, :::3236->3236/tcp, 0.0.0.0:3236-3239->3236-3239/udp, :::3236-3239->3236-3239/udp, 0.0.0.0:5060->5060/udp, :::5060->5060/udp, 0.0.0.0:33434->33434/udp, :::33434->33434/udp, 0.0.0.0:49150->49150/udp, :::49150->49150/udp, 0.0.0.0:3238->3238/tcp, :::3238->3238/tcp, 8888/tcp
container-talos-001-1 appneta.azurecr.io/talos-engine:current "/app/run-engine-wra…" talos-001 11 minutes ago Restarting (0) 48 seconds ago

NAME IMAGE COMMAND SERVICE CREATED STATUS PORTS
container-sequencer-1 appneta.azurecr.io/pathview-cmp:release "/sbin/entrypoint.sh" sequencer 11 minutes ago Up 3 minutes (healthy) 0.0.0.0:7->7/udp, :::7->7/udp, 0.0.0.0:443->443/tcp, 0.0.0.0:1720->1720/udp, :::443->443/tcp, :::1720->1720/udp, 0.0.0.0:3236->3236/tcp, :::3236->3236/tcp, 0.0.0.0:3236-3239->3236-3239/udp, :::3236-3239->3236-3239/udp, 0.0.0.0:5060->5060/udp, :::5060->5060/udp, 0.0.0.0:33434->33434/udp, :::33434->33434/udp, 0.0.0.0:49150->49150/udp, :::49150->49150/udp, 0.0.0.0:3238->3238/tcp, :::3238->3238/tcp, 8888/tcp
container-talos-001-1 appneta.azurecr.io/talos-engine:current "/app/run-engine-wra…" talos-001 11 minutes ago Restarting (0) 57 seconds ago

NAME IMAGE COMMAND SERVICE CREATED STATUS PORTS
container-sequencer-1 appneta.azurecr.io/pathview-cmp:release "/sbin/entrypoint.sh" sequencer 11 minutes ago Up 3 minutes (healthy) 0.0.0.0:7->7/udp, :::7->7/udp, 0.0.0.0:443->443/tcp, 0.0.0.0:1720->1720/udp, :::443->443/tcp, :::1720->1720/udp, 0.0.0.0:3236->3236/tcp, :::3236->3236/tcp, 0.0.0.0:3236-3239->3236-3239/udp, :::3236-3239->3236-3239/udp, 0.0.0.0:5060->5060/udp, :::5060->5060/udp, 0.0.0.0:33434->33434/udp, :::33434->33434/udp, 0.0.0.0:49150->49150/udp, :::49150->49150/udp, 0.0.0.0:3238->3238/tcp, :::3238->3238/tcp, 8888/tcp
container-talos-001-1 appneta.azurecr.io/talos-engine:current "/app/run-engine-wra…" talos-001 11 minutes ago Up Less than a second (health: starting)

NAME IMAGE COMMAND SERVICE CREATED STATUS PORTS
container-sequencer-1 appneta.azurecr.io/pathview-cmp:release "/sbin/entrypoint.sh" sequencer 11 minutes ago Up 3 minutes (healthy) 0.0.0.0:7->7/udp, :::7->7/udp, 0.0.0.0:443->443/tcp, 0.0.0.0:1720->1720/udp, :::443->443/tcp, :::1720->1720/udp, 0.0.0.0:3236->3236/tcp, :::3236->3236/tcp, 0.0.0.0:3236-3239->3236-3239/udp, :::3236-3239->3236-3239/udp, 0.0.0.0:5060->5060/udp, :::5060->5060/udp, 0.0.0.0:33434->33434/udp, :::33434->33434/udp, 0.0.0.0:49150->49150/udp, :::49150->49150/udp, 0.0.0.0:3238->3238/tcp, :::3238->3238/tcp, 8888/tcp
container-talos-001-1 appneta.azurecr.io/talos-engine:current "/app/run-engine-wra…" talos-001 11 minutes ago Restarting (0) 4 seconds ago

Cause

Setup script is unable to mount docker directories required for deployment:

~/workspace/pvc-core/webui docker volume ls
DRIVER VOLUME NAME
local avw25-workdir
local avw25-lockdir

Resolution

1. Run stop script:

sudo ./setup.sh stop

2. Remove both existing container directories:

sudo docker volume rm avw25-workdir
sudo docker volume rm avw25-lockdir

3. Run start script:

sudo ./setup.sh start