Upgrading To Aria Automation 8.18.x

Products

• VCF Operations/Automation (formerly VMware Aria Suite)

Issue/Introduction

This article intends to provide information to enable a successful upgrade to  VMware Aria Automation to 8.18.x.

Environment

Aria Automation 8.x

Resolution

• Upgrades to Aria Automation 8.18.x must be performed via VMware Aria Suite Lifecycle Manager
• Ensure the VMware Identity Manager is upgraded to version 3.3.7
• Ensure that VMware Suite Lifecycle Manager is upgraded to version 8.18
• Read the target version Release Notes and be aware of Known Issues.
• Confirm the target Aria Automation version is compatible with other products in the environment, see Interoperability Matrix.
• Confirm the Aria Automation Upgrade path is supported, see Upgrade Path.
• Ensure ports required for the upgrade are open e.g. 443/8080 see VMware Ports & Protocols.
• Download the required upgrade file from the Broadcom Support Portal
• After downloading, proceed to configure the product binary for Aria Automation
• If needed, increase the CPU, memory and storage as per the target version. See Hardware Requirements 
• Upgrade to Aria Automation 8.18.x using the steps documented here
• The Upgrade Pre-Check should be run at least 10 days in advance of a scheduled upgrade window to allow time to address any issues found
  • These Pre-Checks are part of the upgrade process and can be executed at any time prior  to submitting the task