search cancel

After logging into APM Team Center, everything loads up fine. But a short while later, a "Fatal Error" pop-up shows on the top right of the window.


Article ID: 40488


Updated On:


CA Application Performance Management Agent (APM / Wily / Introscope) INTROSCOPE



 After logging into APM Team Center, everything loads up fine. But a short while later, a "Fatal Error" pop-up appears on the top right of the window.


<Please see attached file for image>

Team Center error.png



 Introscope 10.x



 The error presented is often caused by a configuration issue. This is particularly true if your WebView server and Enterprise Manager/MOM server are not on the same machine, It is important to be able to direct the WebView/Team Center server to the API of the Enterprise Manager that publishes the data.


 Scenario 1:

 In the, there is a configuration section to point WebView towards the MOM/EM.

 # URL that points to root of the Enterprise Manager REST API{EM_HOST}:8081/apm/appmap

 Update the value of EM_HOST with the real hostname/IP of the Enterprise Manager/MOM.


 Scenario 2:

 Another reason that this could fail is if you have WebView and Enterprise Manager on the same machine but the Enterprise Manager webserver port has been changed. That could be done this way:

 -Changing this property in


 in which case the value of 8081 in{EM_HOST}:8081/apm/appmap

 needs to be updated to the correct value.


 Scenario 3:

 The other scenario is if the Enterprise Manager is configured to use HTTPS for the embedded web server port.

 To recognize that, this property in will be uncommented as shown below:


 And then we would need to verify in em-jetty-config.xml the value for the port, by default 8444.

   <Set name="port">8444</Set>

 There is no automatic redirect when using the HTTPS connector so if this is the scenario, you would have to specifically  specify HTTPS protocol in the URL{EM_HOST}:8444/apm/appmap


 Additional Information:

 If these suggestions do not help, then open a case with CA Support to resolve this problem.



Release: CEMUGD00200-10.1-Introscope to CA Application-Performance Management-Upgrade Mai


1558719403475000040488_sktwi1f5rjvs16vbl.png get_app