Extract device details

Products

• VMware Smart Assurance

Issue/Introduction

Method to extract below details in NCM:

• Device Name
• IP address
• Type
• Model
• OID
• Type of discovery (SNMPV2/V3)
• config files collected (if possible)
• compliance rule mapped (if possible)

Environment

NCM 10.1.x / 24.3.x

Resolution

• Device details can be retrieved from NCM GUI under Devices view as shown in below screenshot. 

• SysOID details can be obtained from InfraDB dump of AS or DS server, follow below steps to dump infradb to .txt file from which SysOID details can be extracted:

  1. source /etc/voyence.conf

  2. cd $VOYENCE_HOME/cgi-bin/

  3. ./cflist.cgi > Infra_AS.txt