PF1 can be used in the ISPF VOLSER INQUIRY DISPLAY Panel to get help about the fields from the TMC Volume Record. Is it possible to get help for the meaning of the individual Flag bits?
To get help on the FLAG bits place the cursor on the FLAG Value and press PF1 for Help. If you have “FLAG1 = 45” for example, place the cursor on the 4 or 5 and press PF1. This will result in the “Volser Flag Display” Panel TMPHVFLG showing a three digit abbreviation for each bit:
Following a cross Reference for the Volume Flag bits with their three digit abbreviation:
Volume Record FLAG1
Volume Record FLAG2
Volume Record FLAG3
Volume Record FLAG4
Volume Record FLAG5
Volume Record FLAG6
---- not used ----
See also Programming Guide Chapter "TMC Volume Record Definition with Keywords (TMMTMREC)"
The “DSNB INQUIRY DISPLAY” Panel TMPIDSNB contains the three digit abbreviation for DSNB FLAG1.
Following the meaning of the bits for DSNB FLAG1:
DSNB Record FLAG1
See also Programming Guide Chapter "TMC DSNB Record Definition with Keywords (TMMDSNB)"