SNMP MIB module listing, name and type of SNMP OID file download for VCF Operations for Networks 9.0

Products

• VCF Operations for Networks

Issue/Introduction

This article provides information on

1. Listing the current object identifier (OID) assignment information used in VMware products deploying IETF SNMP technology. This article is useful when:

• You need to find the VMware MIB that contains a particular SNMP object identifier (OID), for example 1.3.6.1.4.1.6876.4.90.401.
• You are searching for an OID ending with 6876.4.90.401.

2. Downloading Latest MIB files in Broadcom Support Portal (ex. SNMP MIB Module) for VCF Operations for Networks 9.0

Environment

VCF Operations for Networks 9.0

Resolution

The SNMP protocol uses binary format to transmit OID information. To decode the binary to string format, you need to install the latest Management Information Base (MIB) module file. 

 MIB files for VCF 9.0 are available to download from the attachment section of this KB

File name:

1. OIDs
2. VMware-mibs-9.0.0NX-86877350
   
   

Checksum Values for above files as below:

Filename	Checksum	Checksum Value
VMware-mibs-9.0.0NX-86877350.zip	MD5SUM	43EA383E2273731FCEA4725B5C701481
OIDs	MD5SUM	CA0DAF358B868C621CA97BEE43ACC551

 

 

Additional Information

Notes:

1. Use the OIDs.txt file attached to this Knowledge Base article to determine the MIB module, name, type and complete OID number you want to search.
   
   
2. The OIDs are backwards compatible to ESX 2.0. They do not change or get deleted once published. You should update your management applications, adding VMware's set of MIB modules so that it shows the name, not the number.