"Set FetchedData = '???OBJECTS/View' " in action diagram editor

Products

• CA Plex

Issue/Introduction

Functions under fetch view has "Set FetchedData =  '???OBJECTS/View' " in action diagram editor displayed.  New functions with this entry will not compile.

Issue is specific to one group model.  Removing/adding back in the libraries in the group model did not help.

Environment

CA Plex 7.21 or higher

Cause

Likely root cause may be due to a problem with the associated Library Model and Host Group model definitions under the LIB.TAB file

Resolution

Take a backup of the environment and models before trying the following.  Affected_Group_Model1 is the model that is having the problem

The reported problem is due to 'LibraryModel1' attached library model attached in 'Host_Group_Model1' host group model.  To resolve the reported problem, please follow the below steps in a non-production, test environment to verify applicability and efficacy before attempting in production:

1. Login into 'Host_Group_Model1' group model, and detach the 'LibraryModel1' attached library, and save and close the 'Host_Group_Model1' group model.

2. Re-login again into 'Host_Group_Model1' and attach the 'LibraryModel1' library model back, and save the model.

3. Go to 'Affected_Group_Model1' group model folder, and open LIB.TAB file.
   3.1. Search for 'LibraryModel1' entry, and remove that entry from the LIB.TAB file, and save the file.

4. Login into 'Affected_Group_Model1' group model.
   4.1. Extract the group model along with all attached libraries.
   4.2. Verify the reported issue.
   4.3. Locate the extracted object 'STORAGE/DataAccess.Fetch.SingleFetch', and open the Action Diagram - AD should open without any error "Token '???OBJECTS/View' is not valid token"