How to change threshold for Appneta Excessive Network Changes alarms

Products

• Network Observability

Issue/Introduction

We are receiving too many 'Appneta Excessive Network Changes' alarms in Spectrum. We would like to be able to configure
   the threshold for when these are generated.

Cause

The 'AppNeta Excessive Network Changes' alarm (pcause 0x6732131) is generated by an Event Rate Rule on the 0x6732130 event ID.

Resolution

Launch the Event Configuration GUI and select the 0x6732130 event

 

Note: There are 2 0x6732130 events, one for the SouthBound Gateway (AppNetaAdmin) and the Second with the Event Rate Rule.

 The event rule can be edited and the threshold changed from its default value. In this case, the default value is 11 occurrences within a 1hour period of time. This can
    be changed from the default along with the event window.