Can't see Mellanox vmnics on an ESXi 8.0 U2 host
book
Article ID: 394663
calendar_today
Updated On:
Products
VMware vSphere ESXi
Issue/Introduction
- ESXi 8.0 U2 has more than 8 Mellanox NICs requiring the nmlx5 driver installed.
- Only 8 of these NICs are available in the ESXi UI or at the CLI when running:
- This issue is confirmed when the message below appears in the /var/run/log/boot.gz file:
WARNING: <NMLX_ERR> No space in devices array!
Cause
The nmlx5 driver built into ESXi 8.0 U2 is limited to 8 uplinks per host.
Resolution
Please work with your hardware vendor to upgrade to ESXi 8.0 U3
Feedback
thumb_up
Yes
thumb_down
No