NAS requirement on secondary hubs with snmpcollector

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

The snmpcollector documentation states that NAS is required on the remote hubs but need clarification if this applies for all alarm types.

Environment

Any snmpcollector version

Resolution

Standard alarm (non-TOT) probe requirements:

1. ppm
2. baseline_engine
3. prediction_engine

Alarm with Time Over Threshold (TOT probe requirements:

1. ppm
2. baseline_engine
3. prediction_engine
4. nas

Additional Information

Install snmpcollector