MUX - Virtual attribute for Status Report does not display data.

Products

• Clarity PPM SaaS
• Clarity PPM On Premise

Issue/Introduction

We created a virtual attribute for the project Objective attribute on the status report object but it is not showing data on the status report.

Steps to Reproduce: 

1. Login to Clarity as Administrator
2. Navigate to Studio->Objects->Status Report and go to Attributes tab.
3. Create virtual attribute for Objective attribute coming from Project object and API enable it.
4. Create virtual attribute for Objective attribute coming from Idea object and API enable it.
5. Navigate to MUX->Projects.
6. Make sure Objective attribute for a given project has some value.
7. Click on the project and go to Status tab.
8. Add virtual attribute created in step 3 above to the status report.
9. Notice no value is showing in the status report.

Expected Results: It should show the value.

Actual Results: It does not show value.

Environment

Clarity 16.3.1

Cause

DE168964

Resolution

The fix is available which is currently behind feature toggle. If you are experiencing the behavior as per the steps above reach out to Broadcom Support.

Workaround: Inactivate virtual attribute coming from Idea object.