How to set the default Timeframe view for Enterprise Overview and Interfaces from DAILY to 2 hours or any other time.

Products

• CA Network Flow Analysis (NetQos / NFA)

Issue/Introduction

Introduction: 

How to set the default Timeframe view for interfaces from DAILY to 2 hours or any other time.

 

DAILY VIEW:

<Please see attached file for image>

 

2 HOUR VIEW: 

 

<Please see attached file for image>

 

Environment:  

RA 9.x - NFA 9.x and above

 

Instructions: 

You can change the default view setting in the web.config:

 

1.  RDP to the RA console and edit the file:

         <install drive>:\Netqos\Reporter\NetQoS.ReporterAnalyzer.WebSite\web.config

 

2.  Find the section near the bottom that looks like this:

<!-- Demo properties (for range, ""2"" = 1 day -->

<!-- <add key=""fixed.date"" value=""05/26/2005 13:45"" />

<add key=""fixed.range"" value=""2"" />-->

<!-- Optional IPaddress or name of NPC links back into SA. Blank for dynamic. --> 

 

3.  And change it to this (change 2 to 7 and move the bolded line outside of the <!- comment brackets ->: )

<!-- Demo properties (for range, ""2"" = 1 day -->

<!-- <add key=""fixed.date"" value=""05/26/2005 13:45"" /> -->

<add key=""fixed.range""value=""7"" />

<!-- Optional IP address or name of NPC links back into SA. Blank for dynamic. -->

 

4.  Now save the config file then log out and log back into NFA.

 

If you want to change this to some other default time range, they are:

1 = 8 hours
2 = 1 day
3 = 1 week
4 = 1 month
5 = 1 year
6 = 1 hour
7 = 2 hours

 

Reference case #00323299

Environment

Release: RAIB1H99000-9.3-Network Flow Analysis-Interface Bundle-Hardware
Component: