Configuring Cisco VIC for NSX Edge Datapath
Article ID: 385546
Updated On:
Products
VMware NSX
Issue/Introduction
NSX Bare metal Edge installation fails on Cisco UCS server and datapathd service generates a core.
Environment
VMware NSX-T Data Center (3.x)
VMware NSX (4.x)
Cisco UCS
Cause
Insufficient RX and TX queues for Datapath process
Resolution
To successfully claim Cisco VICs for the NSX Edge datapath, configure multiple RX and TX queues from the Cisco UCS Manager. The number of queues configured must be sufficient for datapath to have one queue per core. For configuration details, refer to the Cisco documentation.
Additional Information
Feedback
Yes
No
Powered by
