How to delete "1-corporate" VLAN from SDWAN Edge
search cancel

How to delete "1-corporate" VLAN from SDWAN Edge

book

Article ID: 379148

calendar_today

Updated On:

Products

VMware VeloCloud SD-WAN Edge Appliance

Issue/Introduction

Delete button is inactive while trying to remove "1-corporate" VLAN from SDWAN edge

Environment

VMware Velocloud SDWAN Edge

Cause

 "1-corporate" VLAN is inherited from the profile used by the edge.

Resolution

In order to delete the "1-corporate" VLAN, it has to be deleted from the profile, follow the below steps:

1) If it has to be deleted from the profile, "1-corporate" VLAN should not be used by physical interfaces on any of the edges that use the profile. Remove the "1-corporate" VLAN from physical interfaces of all edges using the same profile.

2) From the profile level, check the "interfaces" section for all edge models, remove any association with "1-corporate" VLAN

3) From profile level, select "1-corporate" VLAN now, delete option will be available, click on delete to remove the "1-corporate" VLAN.